A commandline tool for saving and loading flash and eeprom memory (in binary format) for USB MicroDXP.


1. Open up a command prompt in windows, (Start | Run | cmd)
2. Connect a microDXP 
3. In the command prompt, type the following command to save the flash memory to file, this can take 1 to 2 minutes to complete.
   save_parallel_flash.exe parallel_flash.bin
4. Alternatively, to overwrite flash memory of the currently connected microDXP with a saved file
   write_parallel_flash.exe parallel_flash.bin
5. Similar operations can be done with the EEPROM firmware with save_serial_eeprom.exe and write_serial_eeprom.exe