This is a tool for updating the USB firmware on the single channel Mercury Boards, if you have an older Mercury board it's a recommended update for stability. Please note that the 4 channel Mercury (Mercury-4) boards requires a different USB firmware from the single channel Mercury boards.
Steps for updating:
- Download and unzip the package
- Run "loadiic.exe"
- Select the connected Mercury device
- Click on "Load iic File" button
- Select "mercury.iic" to load
Mercury USB Firmware v0.3.1 (2018-07-09)
Mercury-4 USB Firmware v0.3.1 (2018-07-09)
Mercury USB Firmware v0.2.14